Zhaoqing anti-collision vehicle Shaoguan anti-collision buffer car rental on a monthly basis

Zhaoqing anti-collision car, Shaoguan anti-collision buffer car for monthly rental, Xinyue Road and Bridge free consultation hotline 135-0000-3760, Ms. Fang, same WeChat and mobile phone number, always online, feel free to contact. Due to the presence of long transverse cracks at the continuous sections of the bridge deck, the tensile deformation generated at the bridge deck during lifting is not significant, and new cracks will not appear at that location. Therefore, it is not necessary to chisel out the continuous sections of the bridge deck during lifting. When lifting the top beam, simply lift all the beams on the same cover beam synchronously. The interaction of internal stresses between beams caused by inconsistent lifting speeds is very complex during the whole lifting of the beam. Based on past experience, controlling the maximum height difference between each beam during jacking within 1 millimeter of the average lifting height can ensure the continuous structural safety of the beam and bridge deck. Due to the improvement of the traditional lifting process, the lifting equipment has been adjusted accordingly. The jack should be placed under the horseshoe at the end of the beam. Previous designs did not take into account the spacing for replacing the lifting support in the future. After on-site inspections, it was found that the distance between the horseshoe at the end of the beam and the top of the cover beam is generally between 7.8 to 8.8 centimeters. Therefore, the thickness of the jack should not only meet the spacing requirements. Zhaoqing anti-collision car, Shaoguan anti-collision buffer car for monthly rental, Xinyue Road and Bridge free consultation hotline 135-0000-3760, Ms. Fang, same WeChat and mobile phone number, year-round online, always in touch

There were no bearings installed, which resulted in a series of problems for the above-mentioned bridges under the current high tonnage and high traffic loads. It is urgent to replace and repair the bearings. At the same time. Due to the needs of transportation, the maintenance of bridge bearings is extremely important, as it requires higher requirements for the replacement and maintenance of bearings without interrupting or minimizing traffic interruptions. The hollow slab beam on the bridge is composed of 8 pieces per unit. During maintenance and construction, it is necessary to stop driving on the bridge, seal half of the road, chisel off the unbroken guardrails and continuous joints, and lift the entire half of the slab beam before carrying out support replacement and maintenance work. According to the actual situation on site, the gap between the cover beam and the hollow slab beam is small, and lifting equipment such as jacks cannot be directly placed. It is necessary to set up a Bailey sheet steel frame as a support structure under the bridge. The Zhaoqing anti-collision vehicle and Shaoguan anti-collision buffer car are rented on a monthly basis. The free consultation hotline for Xinyue Road and Bridge is 135-0000-3760. Ms. Fang, with the same WeChat and mobile phone number, is always online and can be contacted at any time