27/5000 Xi 'an bridge inspection rental truss bridge inspection truck bridge engineering vehicle bridge inspection equipment car rental

Xi 'an bridge inspection rental truss-type bridge inspection vehicle bridge engineering vehicle bridge inspection equipment rental Xin Yue road bridge consulting hotline: 15800009766 if according to the human potential of the operator to divide, belong to the intermediate potential operation method. Operation method of insulating tools on rod Operators climb the rod to the appropriate position through the rod climbing tools (foot fasteners, etc.), fasten the safety belt, maintain a safe distance corresponding to the system voltage, and then use the insulated rod with different tool accessories at the end of the operation. When using this method, firstly, the longitudinal insulation protection between the charged body and the ground is composed of insulating tools, insulating gloves and insulating boots. Among them, the insulating tools play the main insulating role, and the insulating boots and insulating gloves play the auxiliary insulating role. Second, the insulation shielding cover and insulation clothing are composed of transverse insulation protection between the charged body and the person or between the charged body of different phases, so as to avoid the short circuit between phases or relative short circuit caused by the excessive range of human action.

The characteristic of this operation method is that it is not restricted by traffic and terrain conditions, and can be operated in the pole position which cannot be reached by the insulated bucket arm car at high altitude. The company creates the safety engineering operation, but the mobility, convenience and air operation scope is not as good as the insulated bucket arm car operation. The site monitoring and management personnel should mainly be the safety distance between the body and the electrified body, the most insulated tools, the bridge engineering vehicle, the bridge inspection equipment, the rental of small effective length, and the electrical insulation strength and mechanical strength of the tools should be strictly checked before operation. Insulated platform operation method Insulated platform is usually composed of insulated herringbone ladder, one-leg ladder, insulated car bucket, etc. Operators can either work indirectly by means of insulating tools or directly by means of insulating gloves. The insulating platform acts as the main insulating function between the ground and the ground.

Whether indirect method or direct operation method, under normal circumstances, before the operation on the overseen phase, insulation shielding and isolating appliances should be used to shield or isolate the adjacent phase charged body. At the same time, the operator should wear a full set of insulating protective equipment. Xi 'an bridge inspection rental truss bridge inspection vehicle bridge engineering vehicle bridge inspection equipment rental Xin Yue road bridge consultation hotline: 15800009766