PRODUCT CATEGORIES
FEATURED PRODUCT
CONTACT US
- Add:
- Tel:135-6010-6010
- Fax:135-0000-3081
- E-mail:{Lankecms_email}
- Contacts:{Lankecms_ename}
Your position:Home > Product Show
INTRODUCTION:
Meixian bridge inspection car rental road and bridge inspection car taxi bridge inspection car rental Xinyue road and Bridge Consulting Hotline: 1830208001, the center line of the gap is aligned, and its length is aligned with the width of the bridge. ⑤ Adjust the straight section of the telescopic device and make the gap of each longitudinal beam uniform. ⑥ Then, at the expansion device box or anchor plate, vertically weld the steel bars above Ф 16 for height positioning, and horizontally weld the steel bars for width positioning. ⑦ After the expansion device is properly positioned and anchored, the anchoring reinforcement on one side of the expansion device and the reserved reinforcement in the reserved groove can be welded to ensure the linear fixation and leveling of the expansion device. During welding, only one anchor bar is welded every 2-3 anchor bars, and then the anchor bar on the other side is welded according to the above steps. After both sides are fixed, the rest of the welded anchor bars can be welded again to ensure reliable anchoring. When welding the anchor bar, it is necessary to pay attention not to weld arbitrarily on the side beam and middle beam. There is another type of trip. Meixian bridge inspection car rental road and bridge inspection car taxi bridge inspection car rental Xinyue road and Bridge Consulting Hotline: 1830208001 During the construction, the anchoring reinforcement of the expansion device is not welded firmly enough, or the phenomenon of missing the embedded anchor reinforcement causes hidden danger to the expansion joint itself; during the construction, the installation of the expansion device is not good, and after the bridge deck pavement, the expansion joint is damaged under repeated loads. In order to reduce the expansion joint, a large number of continuous beams or continuous bridge deck are used. In fact, the cracks between the two beams are actually the expansion joints between bridges. On the surface, it seems to be enlarged. After measurement, the actual gap is 7 cm wide, which belongs to a structure of the bridge body and is within the safety range. He said that the crack like place was due to the local damage of the waterstop at the expansion joint. The waterstop is a kind of facility to guide the rainwater on the bridge deck to flow down the slope. Engineers have been arranged to repair Meixian bridge inspection car, hire road and bridge inspection car, rent bridge inspection car, and hire Xinyue road and Bridge Consulting Hotline: 1830208001
{Lankecms_eprev}
{Lankecms_enext}